Brocade Communications Systems Mobility 7131 Series Guida di Installazione Scaricare il pdf (Pagina 19)

Mounting the access point

Brocade Mobility 7131N-FGR Access Point Installation Guide 11

53-1001948-01

To mount the access point on a wall using the provided template:

1. Photocopy the template (on the previous page) to a blank piece of paper. Do

not reduce or enlarge the scale of the template.

CAUTION

If printing the mounting template (on the previous page) from an

electronic PDF, dimensionally confirm the template by measuring each

value for accuracy.

2. Tape the template to the wall mounting surface.

• If the installation requires the antenna be positioned vertically, the

centerline reference (of the template) needs to be positioned vertically. The

cabling shall exit the access point in a vertical direction.

• If the installation requires the antenna be positioned horizontally, the

vertical centerline (of the template) needs to be positioned horizontally.

The cabling shall exit the access point in a horizontal direction.

3. At mounting targets A and B, mark the mounting surface through the template

at the target center.

4. Discard the mounting template.

5. At each point, drill a hole in the wall, insert an anchor, screw into the anchor the

wall mounting screw and stop when there is 1mm between the screw head and

the wall.

If pre-drilling a hole, the recommended hole size is 2.8mm (0.11in.) if the

screws are going directly into the wall and 6mm (0.23in.) if wall anchors are

being used.

6. If required, install and attach a security cable to the access point lock port.

7. Attach the antennas to their correct connectors.

8. For information on available antennas, see “Antenna options” on page 7.

9. Place the large center opening of each of the mount slots over the screw

heads.

10. Slide the access point down along the mounting surface to hang the mount

slots on the screw heads.

AP7131N_InstallationGuide.book Page 11 Tuesday, August 24, 2010 5:09 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 64 65

Nessun commento

Brocade Communications Systems Mobility 7131 Series Guida di Installazione Pagina 19